Shared Line Appearance (SLA) feature helps users share SIP trunks and FXO trunks. It also helps monitor the status of the shared line. SLA feature works with BLF key on IP phones.
- When an incoming call is received, all the SLA stations are informed of it and may join it if the shared line allows to barge in.
- When an outgoing call is made by one SLA station, all members shared with the same line are informed about the call, and will be blocked from this line appearance until the line goes back to idle or the call is put on hold.
To use SLA, you need do the following:
- Enable SLA feature on a FXO trunk or VoIP trunk.
- Create SLA Stations.
- Configure BLF keys for the shared line on the stations' IP phones. The BLF key value is "extension number_trunkname".
SLA Sample Configuration
You need at least two IP phones to set up SLA. In a boss-assistant scenario, the boss will share the FXO trunk 5503305 with the assistant. If the boss’s phone is extension 5000 and the assistant's phone is 1000, then you can set up a shared line by following these steps:
- Go toSettings > PBX > Trunks, edit the FXO trunk, check the option Enable SLA and configure SLA options.
- Allow Barge: check this option, the other SLA station shared the same line could press the BLF key to join the conversation.
- Hold Access: if set to open, other stations that share the line could retrieve the call; if set to private, the call can be retrieved only by the station that previously put the call on hold, not by others sharing the same line.
- Go to Settings > PBX > Call Control > SLA to create SLA stations to monitor and share the FXO trunk 5503305. Here we create two stations, one for extension 5000, one for extension 1000.
- Configure BLF key on the boss's IP phone(extension 5000). If the configuration is correct, you can see the BLF key LED is green.
- Configure BLF key on the assistant's IP phone(extension 1000). If the configuration is correct, you can see the BLF key LED is green.
- All the configurations are done. You can enjoy the SLA feature now.
- Making Outgoing Calls
If the BLF key shows the shared line is idle, the boss or the assistant could press the BLF key to use the line. After hearing a dial tone, he/she could dial the external number to call out.
If the BLF key LED turns red, which indicates the line is in use now. The other SLA station could not use the line to make outgoing call now.
- Handle Incoming Calls
When an external call reaches the shared line, all the SLA stations will ring. Any of the stations could pick up the call.
- Bargining-in an Active Call
When there is an active call between an SLA station and an external number through the shared line, other SLA stations could join the call by pressing the BLF key if “Allow Barge” is enabled for the shared line.
- Hold and Retrieve Calls
During the call, the SLA station could press the BLF key to hold the call.
If Hold Access is set to "open", other stations that share the line could retrieve the call;
If Hold Access is set to "private", the call can be retrieved only by the station that previously put the call on hold.