This guide introduces how to provision Snom IP phones with Yeastar S-Series VoIP PBX. You have two ways to configure the Snom phone:
Note: Before provisioning the phones, you must reset the phones to factory defaults in case that the phones have residual settings of a previous configuration.
Supported Phone Models
- 320, 710, 715, 720, 725, 760, 765
- D120, D305, D315, D345, D375, D712, D715, D725, D745, D765, D785
- M215 SC
- C520-WiMi
Provisioning Snom Phones via PnP
1. Connect the phone to the same network with Yeastar S-Series VoIP PBX. The phone will send a PnP request to the PBX when booting up.
2. Log in Yeastar S-Series VoIP PBX Web interface, go to “Auto Provisioning” App. Click “Scan”, all the phones in the local network will show up on the page.
3. Search the phone by IP address or MAC address, and click “Edit”.
4. Choose the phone Model, active a line and assign an extension for the phone. You can also configure keys, features, preferences and codec for the phone.
5. Click “Save”.
6. The system prompts you to reboot the phone, click “OK”. The phone will reboot and configure automatically.
Note: if the phone doesn’t reboot automatically, please reboot the phone manually.
Provisioning Snom Phones via DHCP
1. Connect the phone to the same network with Yeastar S-Series VoIP PBX.
2. Disable local DHCP server in your local network, e.g. disable DHCP server on Linksys router.
3. Enable DHCP server on Yeastar S-Series VoIP PBX and configure the DHCP server settings according to your local network. (Settings > System > Security > Service)
4. Go to “Auto Provisioning” App. Click “Scan”, all the phones in the local network will show up on the page.
5. Search the phone by MAC address or IP address, and click “Edit”.
6. Choose the phone Model, active a line and assign an extension for the phone. You can also configure keys, features, preferences and codec for the phone.
7. Click “Save”.
8. The system prompts you to reboot the phone, click “OK”. The phone will reboot and configure automatically.
Note: if the phone doesn’t reboot automatically, please reboot the phone manually.
1 Comments